QC inspectors are responsible for ensuring that products meet the required standards before they are shipped to consumers. In the garment industry, this includes verifying the dimensions of garments, checking the fabric composition and density, verifying labels, and inspecting packaging. There are five fundamental steps that QC inspectors should take during their garment inspection procedure:
Measuring garment dimensions: QC inspectors should measure each garment to ensure that it meets the required specifications. They should also check for symmetry and identify any defects.
Physical tests of buttons, zippers, and accessories: QC inspectors should test all buttons, zippers, and other accessories to ensure that they are secure and functioning properly. Using standard ‘pull tests’ and ‘fatigue tests’ on a standard nr of garments per batch.
Fabric density & composition tests: QC inspectors should test the fabric density and composition to ensure that it meets the required standards. These standards will determine the lifespan of the garment through wear and wash cycles. Grams per square meter (GSM) can be measured by QC inspectors with the use of an electronic scale.
Label verification: QC inspectors should verify that all labels are correct and present on each garment. US and European markets have garment labeling requirements, missing or incorrect labeling could result in fines for the importer as well rejection by Customs.
The US Textile Fiber Products Identification Act stipulates that garment labels must include the following information:
- The fiber content of the garment
- Country of origin
- Care instructions for washing and ironing
- Identity of manufacturer / importer / distributor
Packaging inspection: QC inspectors should inspect all packaging to ensure that it is secure and free of defects. Testing to make sure the desiccant is not Dimethyl Fumarate (DMF), which is banned in most developed destination markets due to its high toxicity and allergic reactions.
Consumer protection laws in different countries have different regulations for packaging but most need clear labeling on what the product is, what it is made from, and where it comes from.
By following these five steps, QC inspectors can ensure that garments meet the required standards before they are shipped to consumers.
All QC inspectors for Inspexion.com have been verified and have experience in the fields they quote for, so you can be sure they will cover all these steps and more.
Did you find this blog post helpful? Share your thoughts in the comments below!
Submit a comment